Melba, Idaho has **1 weigh station locations** operating under Idaho DOT and FMCSA regulations to ensure commercial vehicle weight compliance and highway safety. Every professional driver operating semi trucks, tractor trailers, 18-wheelers, box trucks, and other commercial vehicles on Idaho highways must understand weigh station rules, bypass eligibility, and compliance requirements when passing through the Melba corridor.
Federal weight limits cap single axle loads at 20,000 lbs, tandem axles at 34,000 lbs, and gross vehicle weight at 80,000 lbs (with standard configurations). Idaho may have special permit routes for oversize and overweight loads exceeding these limits. Melba-area weigh stations use both static scales and weigh-in-motion (WIM) technology to screen vehicles as they approach, with PrePass and Drivewyze transponder programs allowing eligible carriers with clean safety ratings to bypass without stopping.
Owner-operators and fleet managers routing loads through Melba should be aware that open weigh stations must be entered by all commercial vehicles over 10,000 lbs GVWR unless they have an active bypass notification. Failure to stop at an open weigh station is a serious violation that can result in fines, out-of-service orders, and CSA score impacts that affect your operating authority. Always check weigh station status via 511, Trucker Path, or state DOT apps before approaching Melba.
After clearing a weigh station near Melba, drivers can find truck parking near Melba for mandatory HOS rest breaks, fuel stops at local truck stops, and semi truck parking near me for load staging. Stackkly's platform makes it easy to plan your entire Melba stop—from weigh station to parking to services.
Melba Interstate Weigh Stations
Primary FMCSA-operated facilities screening 18-wheelers and tractor trailers on major freight routes through Melba.
Melba State Highway Scales
Secondary Idaho DOT scales on state routes checking box trucks and semi trucks under 80,000 lbs gross weight.
Melba Portable Scale Locations
Mobile DOT enforcement units that operate seasonally—check trucker apps for current locations near Melba.
PrePass/Drivewyze Bypass Corridors
Carriers with PrePass transponders may bypass eligible Melba-area weigh stations—check your bypass status before approaching.
No fee (required stop)
Average daily rate
PrePass/Drivewyze subscription: ~$30-50/month
Monthly rate
Melba has 1 weigh station locations affecting commercial vehicle routes in the area. Violations for skipping an open weigh station can result in fines of $250–$16,000+ depending on the severity, plus CSA inspection record impacts. Overweight violations carry per-pound fines that compound quickly for heavy loads. After passing inspection, use Stackkly to find truck parking near Melba or overnight truck parking near me to complete your mandatory HOS rest.
